30 KW Generac Generator

  • Power Zone® 410 Controller, NFPA 110 System Control Capable
  • Corrosion Resistant Sound Attenuated Aluminum Enclosure
  • Five Year/ 2,000 Hour Limited Warranty
  • ± 1 % Digital Voltage Regulation
  • < 5% Total Harmonic Distortion Power Quality
  • Double-Wall Fuel Tank UL 142 & ULC S601 Certified
  • EPA Emissions Certified
  • CA & MA Emissions Compliant
  • UL 2200 Listed

Optional Field-Installable Features

  • Push-Button Emergency Stop
  • NFPA 110 System Control & Remote Annunciation
  • Cold Weather Operation Heaters
  • Fuel System & Venting Kits

View Full Spec Sheet

  • INNOVATIVE DESIGN & PROTOTYPE TESTING are key components of GENERAC’S success in “IMPROVING POWER BY DESIGN.” But it doesn’t stop there. Total commitment to component testing, reliability testing, environmental testing, destruction and life testing, plus testing to applicable CSA, NEMA, EGSA, and other standards, allows you to choose GENERAC POWER SYSTEMS with the confidence these systems will provide superior performance.
  • TRUE POWER- ELECTRICAL TECHNOLOGY: Superior harmonics and sine wave form produce less than 5% Total Harmonic Distortion for utility quality power. This allows confident operation of sensitive electronic equipment and micro-chip based appliances, such as variable speed HVAC systems.
  • SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE REGULATION: This state-of-the-art power maximizing regulation system is standard on all Generac models. It provides optimized FAST RESPONSE to changing load conditions and MAXIMUM MOTOR STARTING CAPABILITY by electronically torque-matching the surge loads to the engine. Digital voltage regulation at ± 1 %.
  • SINGLE SOURCE SERVICE RESPONSE from Generac’s extensive dealer network provides parts and service know-how for the entire unit, from the engine to the smallest electronic component.
  • GENERAC TRANSFER SWITCHES: Long life and reliability are synonymous with GENERAC POWER SYSTEMS. One reason for this confidence is the GENERAC product line includes its own transfer systems and controls for total system compatibility.
Model # Product Description
Control System Kits
G0080180 90% Fuel Level Alarm The 90% fuel level alarm alerts the fuel fill operator when the tank reaches 90% fill level by sounding an audible alarm and triggering an LED warning light.
G0080170 Enclosure Mounted Emergency Stop Kit Emergency Stop consists of a red push button switch; mounts to the exterior of the generator enclosure; replaces the Generator Emergency Shutdown rocker switch in the same location.
G0099250 Remote Emergency Stop Kit, Surface Mount Emergency Stop consists of a red push button switch with a twist release; switch has an aluminum enclosure which can be mounted extending out from a surface; mounts remote from generator such as near an electrical panel.
G0099260 Remote Emergency Stop Kit, Flush Mount Emergency Stop consists of a red push button switch with twist release; switch has an aluminum enclosure which can be mounted flush; mounts remote from generator such as near an electrical panel.
G0099270 Remote Emergency Stop Kit, Break Glass Emergency Stop consists of a spring-loaded switch; switch is behind breakable glass in an aluminum enclosure; glass can be broken with a tethered hammer; mounts remote from generator such as near an electrical panel.
G0070001 Generac Load Manager, 50 A 50 A Load Manager helps optimize the performance of the standby generator by managing large electrical loads upon startup and shed them to aid in recovery when overloaded.
G0070061 Generac Load Manager, 100 A 100 A Load Manager helps optimize the performance of the standby generator by managing large electrical loads upon startup and shed them to aid in recovery when overloaded.
Power Zone Kits
G0080240 NFPA 110 Controller Kit Includes controller module with Key Switch, Alarm Horn, and Emergency Stop Switch that connects to Power Zone 410 controller, 10 A battery charger, and remote annunciator panel; requires a capable transfer switch to be considered for NFPA 110 system control and remote annunciation.
G0098511 Remote Annunciator Panel with 8 Relays Remote annunciator panel with relays; mounts in the structure which is connected to backup power
G0098521 Remote Relay Panel Remote relay panel without LEDs or keypad; mounts in the structure which is connected to backup power.
G0098531 Remote Annunciator Panel without Relays Remote annunciator panel without relays; mounts in the structure which is connected to backup power.
G0089370 Power Zone 410 1/0 Extender Kit Expands 1/0 for the Power Zone 410 controller to provide connections for additional accessories; connects to controller with a three-wire RS-485 interface.
G0089360 Power Zone Gateway Kit Provides an Ethernet connection port for the generator for a Building Management System (BMS); NOT intended for or able to be used with Mobile Link or Fleet.
Operating Environment Kits
G0080140 Cold Weather Kit Kit includes an engine block heater and battery heater; recommended for operating environments where the temperature drops below 32 °F (0 °C); applies to RA01522, RA02022, and RA03022 models.
Installation Kits
G0089040 5 Gallon Spill Box Kit The 5 Gallon Spill Box screws into the existing fuel fill port of the base tank; it captures and contains fuel if over fil ling or spilling occurs during the fueling process; applies to double-wall fuel tanks only.
G0080160 Spill Box Drainback Kit The Spill Box Drainback kit allows fuel captured in the Five Gallon Spill Box to drain directly back into the fuel tank; applies to double wall fuel tanks only.
G0080190 Tank Riser Kit, RA01522 & RA02022 Tank Risers support the fuel tank raising it above the foundation surface; may be required in some jurisdictions to help avoid potential corrosion; applies to RA01522 and RA02022 double-wall fuel tank models
G0098990 Tank Riser Kit, RA03022 Tank Risers support the fuel tank raising it above the foundation surface; may be required in some jurisdictions to help avoid potential corrosion; applies to RA03022 double-wall fuel tank models.
G0080210 Fuel Fill Drop Tube, 50 US Gallon Tank, RA01522 & RA02022 The Fuel Fill Drop Tube is used to prevent sparking due to static electricity buildup which can be caused by the fuel dropping into the tank from the fill area; using a drop tube results in submerged filling which increases the fuel delivery flow rate and reduces vapors, foam, and potential tank evaporation; applies to 50 US gallon double-wall fuel tank for RA01522 and RA02022.
G0080200 Fuel Fill Drop Tube, 100 US Gallon Tank, RA01522 & RA02022 The Fuel Fill Drop Tube is used to prevent sparking due to static electricity buildup which can be caused by the fuel dropping into the tank from the fill area; using a drop tube results in submerged filling which increases the fuel delivery flow rate and reduces vapors, foam, and potential tank evaporation; applies to 100 US gallon for RA01522 and RA02022.
G0098930 Fuel Fill Drop Tube, 50 US Gallon Tank, RA03022 The Fuel Fill Drop Tube is used to prevent sparking due to static electricity buildup which can be caused by the fuel dropping into the tank from the fill area; using a drop tube results in submerged filling which increases the fuel delivery flow rate and reduces vapors, foam, and potential tank evaporation; applies to 50 US gallon double-wall fuel tank double-wall tank for RA03022.
G0098940 Fuel Fill Drop Tube, 130 US Gallon Tank, RA03022 The Fuel Fill Drop Tube is used to prevent sparking due to static electricity buildup which can be caused by the fuel dropping into the tank from the fill area; using a drop tube results in submerged filling which increases the fuel delivery flow rate and reduces vapors, foam, and potential tank evaporation; applies to 130 US gallon double-wall fuel tank for RA03022.
G0080220 Stainless Steel Fuel Lines, RA01522 & RA02022 Jurisdictions may require the use of stainless steel fuel lines instead of the standard hoses provided with the generator; stainless steel lines are fire resistant for additional safety; applies to RA01522 and RA02022.
G0098960 Stainless Steel Fuel Lines, RA03022 Jurisdictions may require the use of stainless steel fuel lines instead of the standard hoses provided with the generator; stainless steel lines are fire resistant for additional safety; applies to RA03022.
G0080230 Vent Extension Kit, RA01522 & RA02022 The Vent Extension kit consists of fuel tank vent pipes and supports raising the vent height above the height of the generator roof; applies to double-wall fuel tanks for RA01522 and RA02022.
G0098970 Vent Extension Kit, RA03022 The Vent Extension kit consists of fuel tank vent pipes and supports raising the vent height above the height of the generator roof; applies to double-wall fuel tanks for RA03022.
G0065120 Lockable Fuel Cap The Lockable Fuel Cap provides the ability to lock the fuel system to help prevent tampering or fuel theft.